INFLATABLES
MULTI PURPOSES INFLATABLES PVC COATED FABRIC
Nowadays the nedds of PVC Coated Material is thriving drastically. Being fully aware for such a need, Ateja through its international brand AGTex release a collection of multi purpose Inflatables PVC Coated Material which can be used for inflatable toys, inflatable pool, advertising inflatable arches and inflatable structure.
Designed to meet the specification of outdoor application, high water resistant characteristics and fire rated performance make it ideal outdoor material for all weather application.
 Inflatables Toys |
 Inflatables Pool |
 Advertising Inflatables Arches |
 Inflatables Structure |
TECHNICAL SPECIFICATION
The technical specification shown here are based on the best current available and average results from laboratory testing with at ±5% tolerance and provided as a source of information only and do not constitute any agreement concerning the good’s warranty and refers to the goods supplied on original state without any processing done by the customer.
The specification suggested here does not guarantee the particular application of the customer and it requires the customer to conduct their won comprehensive test concerning suitability of the material for its intended application.
*** Available in 550ACB & 650ACM
| Coating Material | : | PVC (Polyvinyl Chloride) |
| Base Fabric | : | High Tenacity Polyester |
| Total Weight | : | 550 gr/m2 |
| Width | : | 200 cm, 250 cm, 300 cm, & as requested |
| Thickness | : | 0.45 mm |
| Tensile Strength | : | 260 daN/5cm |
| Tear Strength | : | 25 daN |
| Working Temperature | : | -30 ∼ +70 oC |
| Flame Retardancy | : | Available upon request |
| Adhesion | : | 9 daN/5cm |
| Finishing | : | Glossy/Matte |
| Quality Management System | : | ISO 9001:2008 |
| Standard EN ISO 2286-2 | : | Total Weight & Thickness |
| Standard EN ISO 1421 | : | Tensile Strength |
| Standard EN ISO 2411 | : | Adhesion |
| Standard DIN 53363 | : | Tear Strength |
| Coating Material | : | PVC (Polyvinyl Chloride) |
| Base Fabric | : | High Tenacity Polyester |
| Total Weight | : | 650 gr/m2 |
| Width | : | 200 cm, 250 cm, 300 cm, & as requested |
| Thickness | : | 0.5 mm |
| Tensile Strength | : | 280 daN/5cm |
| Tear Strength | : | 30 daN |
| Working Temperature | : | -30 ∼ +70 oC |
| Flame Retardancy | : | Available upon request |
| Adhesion | : | 9.5 daN/5cm |
| Finishing | : | Glossy/Matte |
| Quality Management System | : | ISO 9001:2008 |
| Standard EN ISO 2286-2 | : | Total Weight & Thickness |
| Standard EN ISO 1421 | : | Tensile Strength |
| Standard EN ISO 2411 | : | Adhesion |
| Standard DIN 53363 | : | Tear Strength |
DOWNLOAD CATALOGUE
COMPOSITE MEMBRANE
- Base Fabrics
- Primary Coating
- Top Coating
- Surface Treatment (Lacquering)
BASE FABRIC
A woven base fabric of high tenacity polyester yarns is the base material to provide tear strength, tensile strength and dimensional stability on finished product.
PRIMARY & TOP COATING
SURFACE TREATMENT (LACQUERING)
THE MAJOR ADVANTAGES
- Limitless architectural design possibility
- Low construction cost & efficiency
- Available for large size roofings & fitting
- Lightweight and flexible yet strong and durable
- Easy handling and fast installation
- Mobile, temporary and permanent basis use
- Weather and environmental friendly
MAIN BENEFITS
- Printable and Easily Absorb the Ink
- Excellent Tensile and Tear Strength
- Easy Maintenance
- Waterproof and Superb Protection Against Ultra Violet
ATEJA GRACE TEXINDO, PT
Jl. Raya Batujajar KM 3 No. 330
Padalarang, Bandung – Jawa Barat, Indonesia
T: +62 22 6866028
E: agtex@agtex.co.id
OTHER PLANT
ATEJA MULTI INDUSTRI
ATEJA TRITUNGGAL 1
ATEJA TRITUNGGAL 2
ATEJA TRITUNGGAL 4
ATEJA TRITUNGGAL 6
INTERNATIONAL BRANDS
ATEJA – Interior Fabric
ATEJA – Mattress Ticking
ATEJA – Transportation Interior
ATEJA – Bus Cloth
ATEJA – Flooring
ATEJA HEALTH CARE – Face Mask & Hazmat
LORENZIA – Contract Fabric
SUNPROOF – Technical Textile for Outdoor
SOLARCOOL – Technical Textile for Window
AGTEX – Composite Membrane
EDHO – Drapery